Drypack – US 20 – Kriega®

Drypack – US 20 – Kriega®

142,29

SKU: KR.01.01061.098.000 Categories: , ,
000

DESCRIPTION

Kriega® – US-20 Drypack 100% waterproof drybag accessory/tailpack.

The Pack

20-litre capacity 100% waterproof tailpack. Innovative design which attaches directly to the seat-pad. The US-20 also comes equipped with removable shoulder and waist straps. It can be carried courier style, on or off the bike.

Mesh

Base anti-slip mesh also doubles as a pocket to store the shoulder & waist straps when the US-20 is attached to the bike. The shoulder strap connects to the large D-rings at each end of the pack and the waist strap connects to 2 fold away buckles at the corners of the mesh-pocket.

Fitting

The US-20 tailpack is designed to fit most race-rep style seat pads (attachment straps included). The pack is easily attached/removed by 4 x quick-release buckles. No extra bungees or rain covers needed. Remove the 2 x compession straps from the US-20. Remove the bike’s seat pad. Lay the straps in to the void of the rear seat. Replace the seat pad and ensure it is correctly locked down (thread the top roll-over strap through the pillion grab-strap if present). Finally, connect all 4 x quick-release buckles and tighten the pack down on to the seat. NB – it is important to use the 2 x strap-tidy components on each compression strap. These components ensure there is no web-creep once the strap has been tightened.

The US-20 can fit a traditional style long seat. We recommend the use of the otional connector-straps (see link below). This option allows the loose strap-ends to be connected together over the top of the seat, when not using the tailpack. The US-20 can also be used more effectively on racks by the use of the optional 4 x loop straps (see link below). This strap spec. allows the web to be ‘tied’ to the rack rather than just run under it.

Tech Spec

Size: 400(H) x 260(W) x 190(D) mm – 20-litre capacity – 100% wateproof (main body) – Side access zip pocket (water-resistant) – Coated-mesh pocket – Shoulder & waist straps – 1000D Dupont Cordura – RHINOTEK: abrasion resistant fabric – HYPALON: abrasion resistant re-enforcement – DRYPACK: taped-seam liner – 420D ripstop nylon – lightweight yet extremely strong – Acetal ITW ladderloc buckles – YKK water-resistant zip – 10-year guarantee.

 

US-20 include also: KR.06.01091.098.001 US-Metal Buckle Straps (x4) – 4 x special-fit straps + 6061-T6 alloy fitting hooks, designed for use with motorcycle rear-racks. Extra secure sub-frame fitting kit allows tailpack combinations of up to 90-litres. Fitting straps have been designed to fit virtually any style of bike. Particularly suitable for traditional one-piece seats or bolt-on seat-pads/racks.

 

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.