Base for OEM Multifunction Display YAMAHA T-700 WR + GPS Garmin Montana 600/700-XT (VERT.) – Twalcom®

Base for OEM Multifunction Display YAMAHA T-700 WR + GPS Garmin Montana 600/700-XT (VERT.) – Twalcom®

129,90

For YAMAHA T-700/WR/EXTREME from 2023 INCLUSIVE

SKU: AA.02.03310.006.006 Categories: , ,
000

For YAMAHA T-700/WR/EXTREME from 2023 INCLUSIVE

DESCRIPTION

“NEW” For YAMAHA T-700/WR/EXTREME from 2023 INCLUSIVE

“PROTECTED DESIGN by Akran Intellectual Property”

Over the last few years we have designed, tested and industrialized a wide range of accessories dedicated to the panorama of Rally/Raid events. All the accessories derive directly from the experience gained on the competition fields and refined during use.

The support system we designed and produced simple, robust and lightweight, allows side-by-side mounting of the Multifunction OEM tool of the Yamaha T-700 >2023 + EXTREME + WR in combination with the Garmin electrified base for Montana 600 Series, 700 and XT with vertical display. This is to the advantage of safety, as all the instrumentation is visible at the same level at a glance. In addition to this, the structure is already prepared for the mounting always upright of the fixing bracket for Rugged Phone 5′′/6.5′′ (Cod. AA.02.03128.006.004).

It can be assembled without disassembling any structural part of the motorcycle (only windscreen and side deflectors to facilitate the positioning and tightening of the screws) and does not require any replacement of motorcycle parts which could compromise the warranty. It consists of an aluminum slide and a reinforcing bracket which acts as a joining element and further stiffening of the entire front load-bearing structure of the motorcycle. It is simply assembled using placements already present in the front structure.

The Base for OEM Multifunction Display + GPS is built with top quality materials. Main structure in Peraluman 3 mm. fixed with three additional 2 and 1.5 mm stainless steel reinforcing brackets. in turn fixed to the original composite structure to distribute every effort homogeneously and reducing any vibration to a minimum. Rubber anti-vibration mounts, supplied stainless steel screws.

It is assembled easily, without any modification to other parts of the motorcycle and does not require the use of specialized labour.

Color: Black. Weight: only 370 grams.

Instructions: clear instructions in Italian with photos.

 

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.